| This is another in the series documenting my setup of a new home server with the Linksprite pcDuino3 Nano. A listing for the entire series can be found here. More information on the pcDuino3 Nano can be found at Linksprite’s website and the pcDuino website. |
Now that I had a clean Debian root file system the next step was to install OpenMediaVault. This was accomplished by following the steps below.
Install the pre-requisite packages.
| root@pcduino3-nano:~# apt-get install build-essential git u-boot-tools texinfo texlive ccache zlib1g-dev gawk bison flex gettext uuid-dev libusb-1.0-0-dev |
Add openmediavault to your sources.
After you answer Y to the install there will be five screens that will require you to provide input.
| Package configuration ┌────────────────────────┤ Postfix Configuration ├────────────────────────┐
│ │
│ Please select the mail server configuration type that best meets your
│ needs.
│
│ No configuration:
│ Should be chosen to leave the current configuration unchanged.
│ Internet site:
│ Mail is sent and received directly using SMTP.
│ Internet with smarthost:
│ Mail is received directly using SMTP or by running a utility such
│ as fetchmail. Outgoing mail is sent using a smarthost.
│ Satellite system:
│ All mail is sent to another machine, called a 'smarthost', for
│ delivery.
│ Local only:
│
│ <Ok>
│ │
└─────────────────────────────────────────────────────────────────────────┘
|
| Package configuration
┌──────┤ Postfix Configuration ├───────┐
│ General type of mail configuration: │
│ │
│ No configuration │
│ Internet Site │
│ Internet with smarthost │
│ Satellite system │
│ Local only │
│ │
│ │
│ <Ok> <Cancel> │
│ │
└──────────────────────────────────────┘
|
| Package configuration ┌───────────────────────────┤ Configuring mdadm ├───────────────────────────┐
│ │
│ If the system's root file system is located on an MD array (RAID), it
│ needs to be started early during the boot sequence. If it is located on
│ a logical volume (LVM), which is on MD, all constituent arrays need to
│ be started.
│
│ If you know exactly which arrays are needed to bring up the root file
│ system, and you want to postpone starting all other arrays to a later
│ point in the boot sequence, enter the arrays to start here.
│ Alternatively, enter 'all' to simply start all available arrays.
│
│ If you do not need or want to start any arrays for the root file system,
│ leave the answer blank (or enter 'none'). This may be the case if you
│ are using kernel autostart or do not need any arrays to boot.
│
│
│ <Ok>
│ │
└───────────────────────────────────────────────────────────────────────────┘ |
| Package configuration ┌────────────┤ Configuring mdadm ├────────────┐
│ MD arrays needed for the root file system: │
│ │
│ all________________________________________ │
│ │
│ <Ok> │
│ │
└─────────────────────────────────────────────┘
|
| Package configuration ┌─────────────────────────┤ ProFTPD configuration ├─────────────────────────┐
│ ProFTPD can be run either as a service from inetd, or as a standalone │
│ server. Each choice has its own benefits. With only a few FTP │
│ connections per day, it is probably better to run ProFTPD from inetd in │
│ order to save resources. │
│ │
│ On the other hand, with higher traffic, ProFTPD should run as a │
│ standalone server to avoid spawning a new process for each incoming │
│ connection. │
│ │
│ Run proftpd: │
│ │
│ from inetd │
│ standalone │
│ │
│ │
│ <Ok> │
│ │
└───────────────────────────────────────────────────────────────────────────┘ |
Once the install completes initialize OpenMediaVault.
| root@pcduino3-nano:~# omv-initsystem |
Now reboot the system. When is has rebooted from a web browser on another machine you should be able to login with Username: admin and Password: openmediavault.
